Viewing Health Statistics For A Specific Interface; Resetting Health Statistics For The Switch - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Monitoring Switch Health

Viewing Health Statistics for a Specific Interface

To view health statistics for slot 4/port 3, enter the show health command, followed by the appropriate
slot and port numbers. A screen similar to the following example will be displayed, as shown below:
-> show health 4/3
* - current value exceeds threshold
Port 04/03
Resources
------------------+----------+--------+--------+---------+--------------------
Receive
Transmit/Receive
In the screen sample shown above, the port 04/03 Resources field displays the port resources that are being
measured (for example, Receive displays statistics for traffic received by the switch, while Transmit/
Receive displays statistics for traffic transmitted and received by the switch. The Limit field displays
currently configured resource threshold levels as percentages of available bandwidth. The Curr field
displays current bandwidth usage for the specified resource. 1 Min. Avg. refers to the average resource
bandwidth used over a 1-minute period. 1 Hr. Avg. refers to the average resource bandwidth used over a 1-
hour period, and 1 Hr. Max. refers to the maximum resource bandwidth used over a 1-hour period.

Resetting Health Statistics for the Switch

The health statistics reset
command cannot be used to clear statistics only for a specific module or port.
To reset health statistics for the switch, enter the health statistics reset command, as shown below:
-> health statistics reset
page 27-38
Limit Curr
80 01
80 01
command can be used to clear health statistics for the entire switch. This
OmniSwitch 6600 Family Network Configuration Guide
1 Min 1 Hr
Avg Avg
01 01
01 01
Diagnosing Switch Problems
1 Hr
Max
01
01
April 2006