Alcatel OmniSwitch 6600 Family Network Configuration Manual page 143

Using 802.1s Multiple Spanning Tree
3
Map VLANs 100 and 200 to MSTI 2 and VLANs 300 and 400 to MSTI 4 using the
command to define the configuration digest. For example:
-> bridge msti 2 vlan 100 200
-> bridge msti 4 vlan 300 400
See "Quick Steps for Configuring MSTIs" on page 6-16
to VLANs.
4
Configure 3 as the maximum number of hops for the region using the
command. For example:
-> bridge mst region max hops 3
Note. (Optional) Verify the MST region configuration on each switch with the show spantree mst region
command. For example:
-> show spantree mst region
Configuration Name
Revision Level
Configuration Digest
Revision Max hops
Cist Instance Number
All switches configured with the exact same values as shown in the above example are considered
members of the Alcatel Marketing MST region.
OmniSwitch 6600 Family Network Configuration Guide
for a tutorial on how to create and map MSTIs
: Alcatel Marketing,
: 2000,
: 0x922fb3f 31752d68 67fe1155 d0ce8380,
: 3,
: 0
April 2006
Quick Steps for Configuring an MST Region
bridge msti vlan
bridge mst region max hops
page 6-15