Ip Specifications; Ip Defaults - Alcatel OmniSwitch 6600 Family Network Configuration Manual

IP Specifications

Managing IP
•
– "Internet Control Message Protocol (ICMP)" on page 14-19
– "Using the Ping Command" on page 14-23
– "Tracing an IP Route" on page 14-23
– "Displaying TCP Information" on page 14-23
– "Displaying UDP Information" on page 14-24
IP Specifications
RFCs Supported
Maximum router VLANs per switch
Maximum IP interfaces per VLAN
Maximum IP interfaces per switch
Maximum ARP filters per switch

IP Defaults

The following table lists the defaults for IP configuration through the ip command.
Description
IP-Directed Broadcasts
Time-to-Live Value
IP interfaces
ARP filters
page 14-2
RFC 791–Internet Protocol
RFC 792–Internet Control Message Protocol
RFC 826–An Ethernet Address Resolution Protocol
4094
8
4094
200
Command
ip directed-broadcast
ip default-ttl
ip interface
arp filter
OmniSwitch 6600 Family Network Configuration Guide
Configuring IP
Default
off
64 (hops)
VLAN 1 interface.
0
April 2006