Alcatel OmniSwitch 6600 Family Network Configuration Manual page 440

Setting Up Authentication Clients
1
To configure the DHCP parameters, access the AV-Client configuration utility and select the DHCP
tab. The following screen displays:
2
Click the box next to "Enable DHCP Operations". Several options will activate in the utility window as
shown in the following screen. When you click on a box next to an option, the option is activated in the
configuration window.
3
When you click one of the features, an indicator is activated directly below the feature. Specify the
number of seconds for the delay for the selected feature.
page 21-24 OmniSwitch 6600 Family Network Configuration Guide
Configuring Authenticated VLANs
April 2006