Alcatel OmniSwitch 6600 Family Network Configuration Manual page 157

Assigning Ports to VLANs
VLAN 1
Default VLAN
Port 1
130.0.0.1
As soon as the workstations start sending traffic, switch software checks the source subnet of the frames
and looks for a match with any configured IP network address rules. Since the workstations are sending
traffic that matches a VLAN rule, each port is assigned to the appropriate VLAN without user interven-
tion. As the diagram on
Port 1 is assigned to VLAN 2, because the workstation is transmitting IP traffic on network 130.0.0.0
•
that matches the VLAN 2 network address rule.
Port 2 is assigned to VLAN 3 because the workstation is transmitting IP traffic on network 138.0.0.0
•
that matches the VLAN 3 network address rule.
Port 3 is assigned to VLAN 4 because the workstation is transmitting IP traffic on network 140.0.0.0
•
that matches the VLAN 4 network address rule.
OmniSwitch 6600 Family Network Configuration Guide
VLAN 2
IP Network 130.0.0.0
VLAN 3
Network 138.0.0.0
IP
Port 2
138.0.0.5
VLAN Rule Classification: Initial Configuration
page 7-10 shows,
Dynamically Assigning Ports to VLANs
VLAN 4
Network 140.0.0.0
IP
Port 3
140.0.0.3
April 2006
OmniSwitch
OmniSwitch 6648
OmniSwitch 6648
OmniSwitch 6648
OmniSwitch 6648
page 7-9