Sample Vlan Configuration - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Omniswitch 6600 series

Hide thumbs Also See for OmniSwitch 6600 Family:

Table of Contents

Configuring VLANs

Sample VLAN Configuration

The following steps provide a quick tutorial that will create VLAN 255 on a stack configuration that

includes four switches. Also included are steps to define a VLAN description, IP router interface, and

static switch port assignments.

Note. Optional. Creating a new VLAN involves specifying a VLAN ID that is not already assigned to an

existing VLAN. To determine if a VLAN already exists in the switch configuration, enter show vlan. If

VLAN 255 does not appear in the show vlan output, then it does not exist on the switch. For example,

-> show vlan

+------+--------+-------+----------+------+----+-----+-----+---------+

Create VLAN 255 with a description of Finance IP Network using the

-> vlan 255 name "Finance IP Network"

Define a IP router interface, named Finance, using the

address to VLAN 255 that will enable routing of IP traffic to other IP router VLANs. For example:

-> ip interface Finance address 21.0.0.10 vlan 255

Assign switch ports 2 through 4 on switch 3 in the stack to VLAN 255 using the following command:

-> vlan 255 port default 3/2-4

Note. Optional. To verify the VLAN 255 configuration, use the

-> show vlan 255

Administrative State: enabled

Operational State

1x1 Spanning Tree State

Flat Spanning Tree State : enabled,

Authentication

IP Router Port

IPX Router Port

OmniSwitch 6600 Family Network Configuration Guide

: Finance IP Network,

ip interface

command to assign an IP host

command. For example:

Sample VLAN Configuration

command. For example:

Show Quick Links

Table of Contents