Displaying Port Monitoring Status And Data - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Port Monitoring

Displaying Port Monitoring Status and Data

A summary of the show commands used for displaying port monitoring status and port monitoring data are
given here:
show port monitoring status
show port monitoring file
For example, to display port monitoring data use the
below:
-> show port monitoring file
Destination
-------------------------------------------------------------------------------
01:80:C2:00:00:00 | 00:20:DA:8F:92:C6 |
00:20:DA:C7:2D:D6 | 08:00:20:95:F3:89 |
00:20:DA:A3:89:F6 | 08:00:20:95:F3:89 |
00:20:DA:BF:5B:76 | 08:00:20:95:F3:89 |
00:20:DA:A3:89:F6 | 08:00:20:95:F3:89 |
00:20:DA:BF:5B:76 | 08:00:20:95:F3:89 |
00:20:DA:A3:89:F6 | 08:00:20:95:F3:89 |
01:80:C2:00:00:00 | 00:20:DA:8F:92:C6 |
00:20:DA:BF:5B:76 | 08:00:20:95:F3:89 |
Note. For more information about the displays that result from these commands, see the OmniSwitch CLI
Reference Guide.
page 27-24
Displays port monitoring status.
Displays port monitoring data.
| Source
OmniSwitch 6600 Family Network Configuration Guide
show port monitoring file
| Type | Data
BPDU | 00:26:42:42:03:00:00:00:00:00
UDP | 08:00:45:00:00:6B:FE:4A:40:00
UDP | 08:00:45:00:00:6B:CF:89:40:00
UDP | 08:00:45:00:00:6B:CF:85:40:00
UDP | 08:00:45:00:00:6B:CF:8A:40:00
UDP | 08:00:45:00:00:6B:CF:86:40:00
UDP | 08:00:45:00:00:6B:CF:8B:40:00
BPDU | 00:26:42:42:03:00:00:00:00:00
UDP | 08:00:45:00:00:6B:CF:87:40:00
Diagnosing Switch Problems
command as shown
April 2006