F-8-335
3) Remove the connector cover [1] (snap-on).
F-8-336
4) Disconnect the connector [1].
5) Remove the 4 screws [2], and detach the manual
feed unit [3].
F-8-337
F-8-338
8.8.18.5 Removing the Manual
Feed Pickup Roller
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the manual feed upper cover [1] (snap-on).
F-8-339
2) Remove the bush [2], and detach the manual feed
pickup roller [3] together with the shaft.
3) Remove the plastic E-ring [4], and detach the
manual feed pickup roller from shaft. Take care not
to drop the parallel pin.
Chapter 8
0007-6717
8-123