Canon iR4570 Series Service Manual page 102

Chapter 2
F-2-48
[1]
F-2-49
[1]Paper feed direction
9) Tighten the fixing screw.
10) Fit the cassette 1 back in.
11) Make a copy, and check to be sure that the left
margin of the image on paper picked up from the
cassette 1 is 2.5 +/-1.5 mm.
12) Fit the grip (right front) back in.
13) Attach the right cover of the machine.
*Adjusting the Cassette 2
6) Loosen the fixing screw [2] of the adjusting plate
[1].
7) While referring to the index you checked in step 5),
move the adjusting plate back and forth. Moving
the adjusting plate toward the rear of the machine
will increase the left margin L1 of the image.
2-18
image
F-2-50
[1]
F-2-51
[1]Paper feed direction
8) Tighten the fixing screw.
9) Fit the cassette 2 back in.
10) Make a copy, and check to see that the left margin
of the image on paper picked up from the cassette 2
is 2.5 +/-1.5 mm.
11) Attach the right front cover of the machine.
*If the left margin on paper picked up from the
manual feeder is not as indicated, make the
following adjustments:
2) Remove the paper from the manual feed tray.
3) Loosen the fixing screw [1] of the manual feed tray
upper cover.
4) While referring to the index you checked in step 1),
move the manual feed tray upper cover back and
forth. Moving the manual feed tray upper cover
toward the rear of the machine will increase the left
margin of the image L1.
image