Canon iR4570 Series Service Manual page 802

Mfps & printers

Hide thumbs Also See for iR4570 Series:

Table of Contents

COPIER > ADJUST > FEED-ADJ

Adjusting the registration loop amount at envelope feed from a

<Setting range> -128 to 127 (Default: 0)

COPIER > ADJUST > CST-ADJ

Entering the basic paper width of the manual feed tray (A4R)

<Setting range> 0 to 1024 (Default: 516)

If RAM on the DC controller circuit board has been cleared or the

board itself has been replaced, enter the value from the service label.

For replacing the paper with detection VR or registering a new value

for the firs time, this service mode shall be executed by

FUNCTION>CST.

Entering the basic paper width of the manual feed tray (A6R)

<Setting range> 0 to 1024 (Default: 175)

If RAM on the DC controller circuit board has been cleared or the

board itself has been replaced, enter the value from the service label.

For replacing the paper with detection VR or registering a new value

for the firs time, this service mode shall be executed by

FUNCTION>CST.

Entering the basic paper width of the manual feed tray (A4)

<Setting range> 0 to 1024 (Default: 791)

If RAM on the DC controller circuit board has been cleared or the

board itself has been replaced, enter the value from the service label.

For replacing the paper with detection VR or registering a new value

for the firs time, this service mode shall be executed by

FUNCTION>CST.

Show Quick Links

Chapters

Table of Contents

Ir3570 series Ir2870 series Ir2270 series