Removing The Main Power Switch; Removing The Manual Feed Pickup Clutch - Canon iR4570 Series Service Manual

1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
[3] [1]
[1]
[1]
[1]
[1]
[1]
[1]
F-8-319
8.8.17.5 Removing the Main
Power Switch
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 4 fastons [1], and detach the main
power switch [2]. (snap-on type)
[1]
[1]
[1]
[1]
[1]
[1]
[2]
0007-6679
F-8-320
When connecting the 4 fastons, be sure that they are
located as indicated by their specific location
numbers.
F-8-321
8.8.17.6 Removing the Manual
Feed Pickup Clutch
iR2270 / iR2870 / iR3570 / iR4570
1) Disconnect the connector (2P) [1].
2) Free the clutch cable [2] from the wire saddle [3].
3) Remove the fixing plate [4]. (2 screws [5])
Chapter 8
0007-6681
8-119