Removing The Control Panel Base Cover; Removing The Control Panel Inside Frame - Canon iR4570 Series Service Manual

F-10-34
5) Free the harness [2] from the clamp [1].
F-10-35
6) Disconnect the connector [1], and detach the
control panel.
F-10-36
10.5.4.2 Removing the Control
Panel Base Cover
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 4 screws [1], and detach the control
panel base cover [2].
10.5.4.3 Removing the Control
Panel Inside Frame
iR2270 / iR2870 / iR3570 / iR4570
1) Disconnect the 2 connectors between the control
panel PCB and the control panel key switch PCB;
then, free the harness from the 2 clamps [2].
2) Disconnect the 2 connectors [3] between the
control panel PCB and the control panel LCD.
Be sure to move the stopper in the direction of the
arrow to detach. These 2 stoppers are moved in
different directions.
3) Disconnect the 2 connectors [3] between the
control panel inverter PCB.
0007-7571
4) Remove the control panel inside frame [1]. (2 TP
screws [2], and 11 self-tapping screws [3])
Chapter 10
F-10-37
0007-7573
F-10-38
10-23