Chapter 8
F-8-101
8.8.3 Pickup Roller
8.8.3.1 Removing the Pickup
Roller/Feed
Separation Roller
iR2270 / iR2870 / iR3570 / iR4570
1) Slide out the cassette.
2) Open the right door (in the case of the separation
roller).
3) Pick the tabs of the individual rollers, and detach
the pickup roller [1], feed roller [2], and separation
roller [3].
F-8-102
Point to Note When Replacing the Feed/Separation
Roller 1
The collar (roller core) of the machine's feed/
separation roller is black.
8-68
Roller/
0007-6569
8.8.4 Sensor Mount
8.8.4.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
[2]
[1]
F-8-103
8.8.4.2 Removing the Right
Door
iR3570 / iR4570
1) Open the right door.
0007-6558
[3]
[3]
[3]
[4]
0007-6563