F-9-91
Do not touch the screw [1] used to keep the fixing
assembly in place. Turning the screw will change the
pressure of the fixing assembly, which cannot be
adjusted in the field, necessitating the replacement of
the fixing assembly.
F-9-92
3) Turn the locking plate [1] in the direction of the
arrow to release it.
F-9-93
9.5.5.6 Removing the Fixing
Film Unit
iR2270 / iR2870 / iR3570 / iR4570
1) While pushing down the release lever (front) [1],
pull out the heater contact [2].
F-9-94
2) While pushing down the release lever (rear) [1],
pull out the heater contact [2].
F-9-95
3) Remove the screw [1], and free the AC harness [2].
F-9-96
4) Free the AC harness [1] from the edge saddle [2].
Chapter 9
0007-7929
9-29