Canon iR4570 Series Service Manual page 837

Sub-item
OP-SZ-DT Turning document size detection in Book mode ON or OFF
Copying with the platen open is switched to the manual document
size input mode (conventional) or the automatic document size
detection mode.
<Setting range>
0: Manual document size input mode [Default]
1: Automatic document size detection mode
NW-SCAN Enabling or disabling the network scan function
<Setting range>
0: Network scan function disabled [Default]
1: Network scan function enabled
Notes:
Not changeable for anything in Japan
Always 1 for PSPCL outside Japan
Changeable for other outside Japan
HDCR-DSP Setting whether or not display HDD clearance in User mode and
changing the contents of clearance
<Setting range>
1: Clear once with 0 [Default]
2: Clear once with random data
3: Clear three times with random data
JOB-INVL Setting the job interval at interrupt
<Setting range>
0: Output the next job continuously in interrupt copying (Standard)
[Default]
1: Start outputting the next job after the last paper of the interrupted
copy job is output
2: Start outputting the next job after the last paper of all jobs is
output
LGSW-DSP Setting whether or not to display [Log display ON/OFF] on the
User mode screen
[Default]
0: Do not display [Log display ON/OFF] [Default]
1: Display [Log display ON/OFF]
COPIER > OPTION >USER
Description Level
2
2
2
2
2