Canon iR4570 Series Service Manual page 835

Sub-item
PR-PSESW Setting whether or not to display the print pause function switch
<Setting range>
0: No print pause function [Default]
The user screen does not display the print pause function.
(Conventional specification)
1: Print pause function [Default]
The user screen does not display the print output stop and restart
settings.
IDPRN-SW Switching the count-up job type about the department management
counter
<Setting range>
0: Counting BoxPrint, ReportPrint, SendLocalPrint, and PDLPrint
in the PRINT category
1: Counting ReportPrint, SendLocalPrint, and PDLPrint in the
PRINT category
CNT-SW Switching the charging counter and default display items
<Setting range>
- When the set value is 0 [Default]
101: Total 1
- When the set value is 1
102: Total 2
202: Copy total 2
127: Total A Total 2
- When the set value is 2
101: Total 1
104: Total small
103: Total large
501: Scan total 1
REMPNL Turning the remote panel function ON or OFF
<Setting range>
0: OFF [Default]
1: ON
BCNT-AST Switching the job type of counting box prints by ASSIST
<Setting range>
0: Count as PDL job [Default]
1: Count as Copy job
COPIER > OPTION >USER
Description Level
1
1
1
1
1