F-10-143
When mounting the harness cover [1], be sure to keep
the harness [2] within the space [3] indicated in the
figure so that the harness [2] will not come into
contact with the gear [4].
F-10-144
Do not touch the screw [1]. Turning it will change the
pressure of the fixing assembly, which cannot be
adjusted in the field, necessitating the replacement of
the fixing assembly.
F-10-145
10.5.12.17 Removing the Gear
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 4 screws [1], and detach the gear cover
[2].
F-10-146
2) Remove the gear [1].
F-10-147
Chapter 10
0007-8420
10-47