Removing The Slide Resistor; Cassette Pickup Solenoid; Removing The Right Cover (Rear); Removing The Right Door - Canon iR4570 Series Service Manual

Chapter 8
8.8.11.6 Removing the Slide
Resistor
iR2270 / iR2870 / iR3570 / iR4570
1) Remove 2 screws [1], and detach the manual feed
tray upper cover [2].
If possible, mark the position of the point of horizontal
registration before removal.
F-8-227
2) Remove the slide resistor [1] (connector [2]).
F-8-228

8.8.12 Cassette Pickup Solenoid

8.8.12.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
8-98
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
0007-6651
(rear) [4].
8.8.12.2 Removing the Right
Door
iR3570 / iR4570
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate
[2].
0007-6652
[4]
[2]
[1]
F-8-229
F-8-230
[3]
[3]
[3]
0007-6654