Canon iR4570 Series Service Manual page 816

Chapter 16
Sub-item
MN-CON
CARD
ALARM
SLT-CLR
SND-STUP
CA-KEY
<MISC-R>
16-56
COPIER > FUNCTION > CLEAR
Description
Clearing RAM on the main controller circuit board
The RAM is cleared when the main power switch is turned OFF and
ON.
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print the
contents of the service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
Clearing the card ID (department) related data
The card ID related data is cleared when the main power switch is
turned OFF and ON.
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
Clearing the alarm log
The alarm log is cleared when the main power switch is turned OFF
and ON.
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
Clearing the salutation setting
<Operating procedure>
1) Select this item and press the OK key.
Clearing the send-read settings
The send-read settings are cleared when the main power switch is
turned OFF and ON.
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
Clearing the CA certificate and key pair
The CA certificate and key pair are cleared when the main power
switch is turned OFF and ON.
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
Level
1
1
1
1
1
2