Chapter 7
F-7-137
2) Remove the face cover rubber [1].
3) Remove the binding screw [2].
4) Remove the RS tightening screw [3].
5) Detach the front cover unit [4] by moving it in the
direction of the arrow.
F-7-138
7.12.5.2 Removing the Waste
Toner Case
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the waste toner case [1].
F-7-139
7-50
Point to note after attaching the waste toner
receptacle
After attaching the waste toner receptacle, move the
waste toner full detection lever [1] up and down to
make sure that the lever is moved smoothly. Faulty
detection may be resulted if the lever is caught in
something and is not moved smoothly.
7.12.5.3
Developing Assembly
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the screw [1].
0007-8029
2) Shift the locking lever [1] to the left to release the
developing assembly.
F-7-140
Removing
the
F-7-141
0007-8034