Circuit Braker; Removing The Rear Cover - Canon iR4570 Series Service Manual

Chapter 10
1) Open the right door.
F-10-185
2) Remove the reuse band [1], and disconnect the
connector [2].
3) Remove the 2 screws (M4x8; RS tightening), and
detach the right door.
F-10-186
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right
door against the lug.
2) Engage the hinge [2] found on the top of the right
door with the hook found on the side plate.
10-56
F-10-187
When tightening the 2 screws used to fix the hinge in
place, be sure to close the right door first.

10.5.17 Circuit Braker

10.5.17.1 Removing the Rear
Cover
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
0007-6388