Chapter 8
8.8
Parts
Procedure
8.8.1 Pick-up Unit 1
8.8.1.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
[2]
[1]
F-8-86
8.8.1.2 Removing the Right
Door
iR3570 / iR4570
1) Open the right door.
8-64
Replacement
0007-6551
[3]
[3]
[3]
[4]
0007-6552
F-8-87
2) Remove the screw [1], and detach the fixing plate
[2].
F-8-88
3) Remove the joint shaft [1], and free the extension
delivery unit [2] from the right door.
F-8-89
4) Disconnect the connector [1], and remove the reuse
band [2]; then, remove the 2 screws (M4x8; RS
tightening).