Canon iR4570 Series Service Manual page 833

Sub-item
U-PASWD
DA-PORT
DA-CNCT
CHNG-STS
CHNG-
CMD
MEAP-DSP
ANIM-SW
MEAP-SSL
CCD-TYPE
<USER>
COPIER > OPTION > BODY
Setting a user password for connection to the SSH server
Setting value:
Up to 8 characters (half-size alphanumerics)
Turning the TOT asynchronous status communication port ON or OFF
<Setting range>
0: CLOSE [Default]
1: OPEN (when DA is attached)
Setting DA connection
<Setting range>
0: OFF [Default]
1: ON
Setting the TOT status connection port number
<Setting range>
1 to 65535 [Default: 20010]
Setting the TOT status connection port number
<Setting range>
1 to 65535 [Default: 20000]
Turning screen transition from MEAP to Native ON or OFF
<Setting range>
0: OFF (Transition to the Native screen) [Default]
1: ON (No transition to the Native screen)
Turn MEAP application error/jam screen display ON or OFF
<Setting range>
0: OFF (Display warning screen) [Default]
1: ON (Do not display warning screen)
Setting the MEAP HTTPS port
<Setting range>
0 to 65535 (same as the setting of another network port system) [Default:
8443]
Setting the CCD unit type
<Setting range>
0: Initial CCD unit [Default]
1: Revised CCD unit
Description
Chapter 16
Lev
el
2
2
2
2
2
2
2
2
2
16-73