Removing The Control Panel Base Cover - Canon iR4570 Series Service Manual

F-10-54
2) Open the right door [1].
F-10-55
3) Remove the 2 screws [1].
F-10-56
4) Slide the control panel [1] in the direction of the
arrow.
F-10-57
5) Free the harness [2] from the clamp [1].
F-10-58
6) Disconnect the connector [1], and detach the
control panel.
F-10-59
10.5.7.2 Removing the Control
Panel Base Cover
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 4 screws [1], and detach the control
panel base cover [2].
Chapter 10
0007-6438
10-27