Canon iR4570 Series Service Manual page 63

Mode Description
set common register source name***: 01 to 99; register/edit (24 characters max.), delete
communicatio
register user abbreviation***: 24 characters max.
ns settings
permit non-ASCII code for FTP**:
delete error file***: (*ON/OFF)
transfer error processing (always print/save/print/*off)
film photo mode***: OFF (ON/*OFF)
number of retries***: *3 times (0 to 5 times)
change standard mode for transmission function***:
read mode: black-and-white machine default :
*black 200 dpi/black 300 dpi/black 600 dpi/black 400 dpi
(if fax only, black 200x100*/black 200x; 200/black 200x400/black 400x400)
file format: *TIFF/PDF/PDF(OCR)
divide by page: ON/*OFF (toggle)
DONE stamp: ON/*OFF (toggle)
register routine task button***: (register/edit, delete M1 through M9)
register: Do you want to register? yes/no
name: 10 characters x 2 lines (max.)
confirm transmission of coded PDF file: (ON/*OFF)
PDF (OCR setup)***
original orientation auto detection: (*ON/OFF)
number of OCR characters for file name: (1 through *24)
initial transmission screen***: routine task button/one-touch button/*new
address
source record***: *add/do not add
display location: inside image/*outside image display target abbreviation:
(*ON/OFF)
telephone No. mark: *FAX/TEL
communication mode: G3-G4/*G3 only
switch character code for e-mail/i-fax transmission: *GB2312/GB18030
reset transmission function settings: Do you want to reset? yes/no
set common duplex record (ON/*OFF)
reception
cassette selection
settings***
switch A: (*ON/OFF)
switch B: (*ON/OFF)
switch C: (*ON/OFF)
switch D: (*ON/OFF)
T-1-25