Canon iR4570 Series Service Manual page 752

Code Detail Name
code
E5F8 0001
0002
Saddle
connector
error
0003
Detection Remedy
The connector Connect the connector
of the paper of the guide home
butting plate position sensor. Check
home position the harness. Replace
sensor has the finisher controller
been identified PCB.
as being
disconnected.
Connector of
guide home
position sensor
(PI13S)
The connector Connect the connector
of the paper of the paper butting
butting plate plate home position
home position sensor. Check the
sensor has harness. Replace the
been identified finisher controller
as being PCB.
disconnected.
Connector of
paper butting
plate home
position sensor
(PI14S)
The connector Connect the connector
of the paper of the paper butting
butting plate plate leading edge
leading edge sensor. Check the
sensor has harness. Replace the
been identified finisher controller
as being PCB.
disconnected.
Connector of
paper butting
plate leading
edge sensor
(PI15S)