Timing Of Increasing The Count - Canon iR4570 Series Service Manual

Chapter 10
240V CA
*6
<Guide to Symbols>
large: large-sized paper (in feed direction, 364 mm or longer; count x 1)
small: small-sized paper (in feed direction, 364 mm or less).
total: all (C + P); count x 1.
double-sided: in auto double-side copying count x 1; feed.
- The 3-digit symbol in the Counter column indicates the setting in the following service does item:
1 through 6 under COUNTER>OPTION>USER>COUNTER.
- Counters 2 through 6 may be changed in the following service mode mode item:
COPIER>OPTION>USER.
*1 :F14-3213/ 3223/ 3218/ 3211/ 3228/ 3221/ 3318/ 3311/ 3328/ 3321/ 3319/ 3312/ 6718/ 6711/ 6728/ 6721/ 6719/
6712
*2 :None in particular
*3 :F14-3338/ 3331/ 6738/ 6731/ 5438/ 5431
*4 :F14-3248/ 3241/ 3348/ 3341/ 6748/ 6741/ 5448/ 5441
*5 :F14-3298/ 3291/ 3398/ 3391/ 6798/ 6791/ 5498/ 5491
*6 :F14-3268/ 3261/ 3368/ 3361/ 6768/ 6761/ 5468/ 5461
** by default, not indicated; may be changed in service mode.
*** '1' is set for the following service mode item: COPIER>OPTION>USE>CNT-SW.
**** '1' is set for the following service mode item: COPIER>OPTION>USER>CNT-SW.

10.2.2 Timing of Increasing the Count

iR2270 / iR2870 / iR3570 / iR4570
The timing at which the count is increased differs depending on the printing mode (single-sided or double-sided),
target of delivery, and type of accessory:
1. Singe-Sided Printing, 2nd Side of a Double-Sided Print
In single-side printing or for the 2nd side of a double-sided print, the count is increased when the trailing edge of
the sheet is discharged outside the machine in relation to the output of the following sensors:
Finisher absent
10-4
Counter Counter
1 2
total 1 total
(large)
101 103
Target of
Condition
delivery
Tray 1
Counter Counter Counter
3 4 5
copy copy not
(total 1) (large) indicated
**
201 203 000
T-10-2
Sensor
Delivery sensor (PS14)
Counter
6
not
indicated
**
000
0006-5385