Removing The Cassette Paper Level Sensor (A/B); Slide Resistor; Removing The Right Cover (Rear); Removing The Right Door - Canon iR4570 Series Service Manual

Chapter 8
8.8.10.8 Removing the Cassette
Paper Level Sensor (A/B)
iR2270 / iR2870 / iR3570 / iR4570
1) Disconnect the connector [1] (1 pc. each), and
detach the cassette power level sensor (A/B) [2].
F-8-209

8.8.11 Slide Resistor

8.8.11.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
8-94
0007-6639
8.8.11.2 Removing the Right
Door
iR3570 / iR4570
1) Open the right door.
0007-6641
2) Remove the screw [1], and detach the fixing plate
[2].
[4]
[2]
[1]
F-8-210
F-8-211
[3]
[3]
[3]
0007-6657