Removing The Pickup Assembly 2; Removing The Sensor Mounting Plate - Canon iR4570 Series Service Manual

F-8-204
8.8.10.6 Removing the Pickup
Assembly 2
iR2270 / iR2870 / iR3570 / iR4570
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness
from the guide; then, remove the 4 screws [2], and
detach the pickup assembly 2 [3].
F-8-205
8.8.10.7 Removing the Sensor
Mounting Plate
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 2 TP screws [1] and the binding screw
[2] from the rear of the pickup assembly, and detach
the bracket [3].
F-8-206
Pickup Unit 1
0007-6635
F-8-207
Pickup Unit 2
2) Disconnect the connector [1], and remove the
screw; then, detach the cassette pickup solenoid [3].
3) Remove the bushing and the 5 screws [4]; then,
detach the sensor base [5].
0007-6637
F-8-208
Chapter 8
8-93