Adjusting System Parameters And Advanced Controls - Christie roadie 25k User Manual

OPERATION
3.8 Adjusting
System
Parameters and
Advanced
Controls
System Configuration
— GENERAL —
3-38
Roadie 25K User's Manual
processing for this source—if desired, override the default "Auto" setting by
selecting the appropriate motion filter:
The projector will automatically use the correct motion filter according to
1)
AUTO:
the incoming signal.
For static images with no motion, such as graphics from a CD.
2) STILL:
For video images that did not originate from film, or for moving
3) MOTION:
computer-generated images.
For video images that originated from film. This will optimize image
4)
FILM:
quality and stability.
FILM MODE THRESHOLD —
detect if an incoming video signal originated from film or not.
DETAIL THRESHOLD —
"Detail" control will begin to magnify high frequencies, which adds details back into
the image. Raise the threshold to ignore more of these high frequencies, and lower
the threshold to magnify more of these frequencies. A setting of "0", for example,
means no noise will be ignored and all will be magnified. An ideal detail threshold is
one in which high frequencies that are causing objectionable noise are not magnified
when using "Detail", but frequencies which can help sharpen an overly-soft image
are magnified when using "Detail".
Use the Configuration menu
to define general operating
parameters and
communications with other
projectors and equipment, and
to access other advanced
processing and image
adjustments affecting overall
performance. In addition, the
Configuration menu provides
access to diagnostics,
calibration tools and the
Service submenu (password-
protected).
Keep in mind that settings in the Configuration menu (and its sub-menus) are
typically "global" settings applied regardless of the type of source your are using.
This characteristic is identified with the
NOTE: The Configuration menu is recommended for experienced users/technicians
only.
'
The first six options in the Configuration menu are explained below:
Language
Choose from available languages to use in the projector's menus. The change will
take effect immediately.
This setting determines how sensitively the projector can
Use "Detail Threshold" to define at what frequency level the
(globe) icon alongside the option.