Connecting A Video Source Using 3G Input Card; Connecting A Video Source Using Dvi - Christie Mirage SST Installation And Setup Manual

Port
Audio Out
Laser rack
USB 1/USB 2
USB 3
Wired Keypad
3D Sync In/3D Sync Out
Ethernet
RS232
GPIO

Connecting a video source using 3G input card

The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface)
sources.
Part number: 108-313101-02+
This card may or may not be included with your model. Standard inputs are subject to change.

Connecting a video source using DVI

The Dual Link DVI input card (DDIC) accepts digital video source from DVI sources. It does not
support incoming analog signals.
Part number: 108-312101-XX
This card may or may not be included with your model. Standard inputs are subject to change.
Mirage SST Installation and Setup Guide
020-102956-08 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
Description
Not supported.
Provides the Ethernet connection to the light source.
Connects a USB flash drive that has been formatted with a FAT32
file system. Can be used for upgrades, backups, restores,a nd
interrogators.
For manufacturing use only.
Physically connects a remote control to the projector.
Supported for 3D-enabled projectors.
Connects to the web user interface and can send Christie serial
commands.
Sends Christie serial commands using a standard RS232 serial
cable.
Provides a method for controlling the projector using electrical
signals.
59