Section 4: Parts and Module Replacement
4.5.39 Remove and Replace the Input Module
1. Unscrew the 2 captive screws.
2. Slide the input module out.
3. Install the new input module.
4.5.40 Remove the Lens
1. Remove and set aside the red security screws on lens plate models (if used).
2. Rotate the lens clamp to the OPEN position.
3. Pull the lens straight out.
4-44
J Series 2.0, 2.4, and 3.0kW Service Manual
020-100739-01 Rev. 1 (01-2012)