Static Routes - CalAmp Fusion LTE User Manual

ICMP : The ICMP protocol (1).
TCP : The TCP protocol (6).
UDP : The UDP protocol (17).
Other : Any other IP protocol.
If the Exclude field is checked, it means that in order for the packet to match with these criteria, it must NOT have
this protocol number.
Source Port
Any : Any source port number.
Specific : Select a specific source port number.
Range : Select a range of source port number.
If the Exclude field is checked, it means that in order for the packet to match with this criteria, it must NOT have
this source port number (or NOT be in the given source port number range).
Destination Port
Any : Any destination port number.
Specific : Select a specific destination port number.
Range : Select a range of destination port number.
If the Exclude field is checked, it means that in order for the packet to match with this criteria, it must NOT have
this destination port number (or NOT be in the given destination port number range).
Direction
The direction corresponds to the path taken by the IP packet inside the Fusion LTE unit.
Any: Any direction
A specific ingress (packet entering Fusion) and egress (packet leaving Fusion) interface can also be specified.
If the Exclude field is checked, it means that in order for the packet to match with these criteria, it must NOT be
processed in the given direction.
Action
Keep : If IP filtering is enabled and an IP packet matches all criteria in the IP filter, keep the IP packet (continue
normal processing of the IP packet).
Drop : If IP filtering is enabled and an IP packet matches all criteria in the IP filter, drop the IP packet.
Custom IP Filters Table
Del
Click on Del to delete the filter.

3.8.6 STATIC ROUTES

Select the Static Routes tab to open the routing configuration page. Static route tables may be created from the Routing
screen and appear at the bottom. Static Routing refers to a manual method used to set up routing between networks.
51