Installing The Admin Tool - Fujitsu ScanSnap N1800 Operator's Manual

■ Installing the Admin Tool

To setup the scanner via the network interface, install the Admin Tool on your computer.
1. Access the scanner from your Web browser by specifying the scanner
name in a URL.
According to the settings described in
specify the URL in one of the following ways.
SSL is [Off], no port number change
http://scanner_name or IP_address/
SSL is [Off], port number change
http://scanner_name or IP_address:port_number/
For port_number, enter the changed port number.
SSL is [On], no port number change
https:// scanner_name or IP_address/
SSL is [On], port number change
https://scanner_name or IP_address:port_number/
For port_number, enter the changed port number.
For SSL, the [Security Alert] window is displayed when connecting. Press the [Yes]
button on the [Security Alert] window.
The [Login] window appears.
2. Enter the user name and password of the administrator.
3. Press the [Login] button.
The download window appears.
"4.8.8 Setting the Admin Connection" (page 121)
77
4.2 Administrator Login
,