Installing The Network Scanner Admin Tool - Fujitsu fi-6000NS Operator's Manual

Hide thumbs Also See for fi-6000NS:

Table of Contents

■ Installing the Network Scanner Admin Tool

To configure the scanner settings via the network interface, the network scanner admin tool must

first be installed on PC.

1. Specify the scanner name as a URL in the web browser's location bar.

For example, when the scanner name is "SCAN001":

http://SCAN001/

An IP address can be specified instead of a scanner name for the URL.

If the IP address is xxx.xxx.xxx.xxx, the specified URL is

http://xxx.xxx.xxx.xxx/.

The "Login" screen appears.

2. Enter a "User Name" and "Password".

Enter "admin" for the user name.

Passwords must be between 7 and 127 characters long.

Alphanumeric characters (case sensitive) and symbols may be entered.

If this tool has already been installed, skip to section

for details about network scanner admin tool operations.

"3.4.2 Logging In"