Turning The Power On/Off; Turning The Power On - Fujitsu ScanSnap N1800 Operator's Manual

2.1

Turning the Power On/Off

2.1.1 Turning the Power On

AUTION
1. Press the power button.
After the scanner starts up, the [Login] window appears.
The installation wizard may be shown depending on the settings.
ATTENTION
After turning the power off, wait for at least 10 seconds before turning the power back on
again.
Do not move or shake the scanner when it is turned on.
This may damage components in the scanner and cause data to be lost.
54

2.1 Turning the Power On/Off