Fujitsu ScanSnap N1800 Operator's Manual page 256

HINT
The number of search results to be displayed can be set by the administrator. For
details, refer to
If items are missing for search results according to the display format of the search
results, "----" is shown instead.
For example, if the display format is "LastName - FirstName" and the user "LastName:
Fujitsu, FirstName: None" is registered on the LDAP server, the search result is
displayed as "Fujitsu ----".
Search methods differ for the My List and LDAP List. Therefore, search results differ
according to the list selected.
Case
Diacritical/Accent marks
For My List search, the following also applies.
All currently displayed levels and their subordinates are searched.
For groups that are shown in a search result, even if a group is selected, the
8. Select the desired e-mail target from the search results and press
The selected e-mail address is added to [Selected e-Mail Addresses].
To add multiple e-mail addresses, repeat this step.
HINT
Selecting an e-mail address and pressing
address to My List.
9. Press the [OK] button.
The e-mail address is added to the field in the [Send e-Mail] window.
"4.9.2 Setting the e-Mail LDAP Server" (page
Search String
is disabled and the contacts of the group cannot be viewed.
256
6.4 Sending the Scanned Data by e-Mail
My List
Insensitive Insensitive
Sensitive Insensitive
can be used to add the e-mail
133).
LDAP List
.