Fujitsu ScanSnap N1800 Operator's Manual page 266

6.5 Sending the Scanned Data by Fax
HINT
If the [Scan] button is pressed (when [Scan Viewer] is [On]), the scanning status and
scan settings are shown during a scan.
The maximum number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages excluding skipped
blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the maximum
number of scanned pages is reached.
When the scanning has completed, the [Scan Viewer] window appears.
For more details about editing on the [Scan Viewer] window, refer to "6.11 Editing the
Scanned Data in the Scan Viewer" (page 339).
For more details about displaying the [Scan Viewer] window, refer to "6.10 Enabling/
Disabling the Scan Viewer" (page 336).
The results of the fax sending is notified to the e-mail address set in the [Notification
To (Sender's e-Mail Address)] field by the fax server.
If data fails to be sent to the fax server, an error notification e-mail with the following
title is sent from the scanner to the e-mail address of the user who logs in.
Network Scanner (XXXX) Error
266