Default Settings - Fujitsu ScanSnap N1800 Operator's Manual

Default settings

The settings installed at time of factory shipping.
dpi (dots per inch)
Dots per inch. Number of dots lined along one inch. The measurement of resolution
normally used for scanners and printers. Higher dpi means better resolution.
Duplex scan mode
A scan mode where both sides of each document sheet are scanned. See also
"Simplex scan mode".
Eject roller
Rollers that feed documents in the ADF to the stacker.
Executive size
A standard international paper size. (184.2 × 266.7 mm / approximately 7.25 × 10.5
in.)
Feed roller
Rollers that feed documents through the ADF.
Idler roller
Rollers that feed documents through the ADF.
Interface
The connection that allows communication from the computer to the scanner.
Landscape orientation
A document with its long side horizontal and its short side vertical.
LDAP (Lightweight Directory Access Protocol)
A protocol for accessing a directory database over a TCP/IP network.
462