Installing The Mini Driver; Installing For The First Time (For Windows  98) - Fujitsu TWAIN 32 Manual

3.2 Installing the Mini Driver

3.2.1 Installing for the first time (For Windows
1. Connect the scanner to be used to the computer. Then, turn on the scanner.
Lastly, turn on the personal computer.
Note
In case of the SCSI connection, be sure to turn on the power in this
sequence. Otherwise, the scanner may not be detected. (In case of the
USB connection, the scanner can be detected, if it is connected after
activating the OS.)
If multiple scanners are to be connected, connect and turn on scanners one
at a time. Then, turn on the personal computer. Repeat the remainder of
this installation procedure for each scanner.
2. Log in to Windows

98)

.
14
BACK TO MAIN PAGE