Restoring The System Settings; 4.15 Managing The User Data Store And System - Fujitsu ScanSnap N1800 Operator's Manual

■ Restoring the System Settings

The backed-up system settings can be restored.
The system settings can be restored in the following ways.
Return the system settings backup file to the same scanner
Import the system settings backed up from another scanner to the current scanner
1. Select [Monitoring & Management]
Settings File].
The [System Settings File] window appears.
2. Select the backup file of the system settings to be restored.
Press the [Browse] button to select a file.
3. Perform either of the following steps.
To return the system settings backup file to the same scanner, select [Restore
in the same scanner].
To import the system settings backed up from another scanner to the current
scanner, select [Import from another scanner].
4. Press the [Restore] button.
A confirmation message appears.
5. Press the [Yes] button.
The system settings are restored. After the system settings are restored, the
scanner is restarted.
ATTENTION
During system settings restoration, do not hold down the power button for 4 seconds or
longer, as it may cause the scanner to function abnormally.
HINT
The network interface connection will be lost when the scanner is restarted to complete
the restoration of the system settings. To continue with other settings, wait a short time
for the scanner to restart, then try reconnecting with the Admin Tool.
If the backed up IP address and scanner name are different from the IP address and
scanner name before restoration, check the settings on the scanner, and try
reconnecting with the Admin Tool.
4.15 Managing the User Data Store and System Settings
184
[Data Management] [System