Installing The Admin Tool - Fujitsu ScanSnap N1800 Operator's Manual

■ Installing the Admin Tool

To setup the scanner via the network interface, install the Admin Tool to your computer.
1. To access a scanner, specify the scanner name as a URL using a Web
browser.
According to the settings described in
specify the URL in one of the following ways.
SSL is [Off], no port number change
http://scanner_name or IP_address/
SSL is [Off], port number change
http://scanner_name or IP_address:port_number/
For port_number, enter the changed port number.
SSL is [On], no port number change
https:// scanner_name or IP_address/
SSL is [On], port number change
https://scanner_name or IP_address:port_number/
For port_number, enter the changed port number.
For SSL, the [Security Alert] window is displayed when connecting. Press the [Yes]
button on the [Security Alert] window.
The [Login] window appears.
2. Enter the user name and password of the administrator.
3. Press the [Login] button.
The download window appears.
"4.8.8 Setting the Admin Connection" (page 120)
79
,