Fujitsu ScanSnap N1800 Operator's Manual page 124

5. For [Job Mode], select whether or not to enable job mode.
6. For [Update Scheduler], set whether to enable automatic update for the
scanner systems (including security, installed options), scanner
settings, and Add-ins.
When you select [On], specify the date and time in [Scheduled Date/Time] you want
the automatic update to be performed.
HINT
Automatic updates start when the scanner is in a standby mode or when no user is
logged in while it is turned on.
Even if notifications from the Central Admin Server or Wake-On-LAN cannot be used,
an update can be performed according to the specified date and time.
If a user is logged in the scanner at the scheduled date and time, updates start after
the user has logged out.
When the setting for an automatic update from the Central Admin Server is distributed
to the scanners, if the update is scheduled to start within ten minutes after the setting
was distributed, the setting will not be applied.
To enable new system settings in an environment where update calls cannot be
issued, scanners must be restarted or logged out. In order to prevent software updates
from running at the same time, enable software update time-period restrictions.
System settings can be updated even when software updates are restricted. For
details, refer to the Scanner Central Admin User's Guide.
If the scheduled automatic update time is set in both the Central Admin Console and
with the Admin Tool, the most recent settings will be enabled.
7. Press the [Details] button.
The window for setting the scanner discovery appears.
4.8 Configuring the Network Settings
124