Setting The Language - Fujitsu ScanSnap N1800 Operator's Manual

4.5.2 Setting the Language

1. Select [System Settings]
The [Language Selection] window appears.
HINT
You can select whether or not to display this window again at the next scanner startup.
To display the window again, for "Show the "Language Selection" screen at next start
up?", select [Yes]. To not display this window at next start up, select [No].
2. Select a language.
Select the desired language for the operating environment.
This returns to the [Language Selection] window.
3. Press the [OK] button.
A language setting confirmation message appears in the selected language.
4. Press the [OK] button.
[Local Settings]
91
4.5 Configuring the System
[Language Selection].