Positioning - Fujitsu ScanSnap N1800 Operator's Manual

6.6.2 Positioning

Set the print position of the scanned data.
The setting selected here will be used every time the user prints a document.
1. On the [Print] window, press the [Positioning] button.
The [Positioning] window appears.
2. Select the print positioning of the data.
Printing results will vary as shown below, depending on the scaling setting. For
more details on the scaling setting, refer to
Button
Center
Scaling
Shrink to Fit Uses the center point of the area available for
printing as a control point.
281
6.6 Printing the Scanned Data
"6.6.1 Scaling" (page
Control Point
Center
Control Point
Available Area
for Printing
277).