Deleting A Job Sequence; Filtering Job Sequences - Fujitsu ScanSnap N1800 Operator's Manual

■ Deleting a Job Sequence

This section describes how to delete a job sequence.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
The [Jobs List] window appears.
3. Select the job sequence to be deleted.
4. Press the [Delete] button.
The confirmation window appears.
5. Press the [OK] button.
The job sequence is deleted.

■ Filtering Job Sequences

This section describes how to filter job sequences.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
The [Jobs List] window appears.
3. Enter [Job Name] and [Comment].
Enter either a part of or full [Job Name] and [Comment] for the job sequence(s) to
be filtered.
4. Press the [Find] button.
The filtered results appear.
HINT
To clear filtered results, delete the entered [Job Name] and [Comment], and press the
[Find] button.
4.17 Setting a Job Sequence
211