Fujitsu ScanSnap N1800 Operator's Manual page 108

1. Select [System Settings]
The [Standby Mode] window appears.
2. For [Logout after], select the desired time before automatic logout.
3. For [Standby after], select the desired time before switching to standby
mode.
ATTENTION
If the [Never] is selected for [Logout after], the selected time for [Standby after] is used
as the wait time before switching to standby mode.
If a time other than [Never] is selected, set a [Standby after] time that is longer than the
[Logout after] time.
4. For [Power-off after], select the time you want before the scanner power
off is turned.
ATTENTION
If a time other than [None] is selected, set a time for [Power-off after] that is longer than
the time for [Standby after].
5. Press the [OK] button.
The times for [Logout after], [Standby after], and [Power-off after] are set.
4.7 Configuring the Login-Related Settings
[Login Settings]
108
[Standby Mode].