Configuring The Ldap Settings; Setting The Login Ldap Server - Fujitsu ScanSnap N1800 Operator's Manual

4.9

Configuring the LDAP Settings

4.9.1 Setting the Login LDAP Server

If a login LDAP server is set, user authentication will be checked.
1. Select [Network Settings]
Server].
The [Login LDAP Server] window appears.
2. For [Server Type], set the connection settings for the login LDAP server.
Select [Off] if an LDAP server is not required for user logins. No other settings can
be entered. Press the [OK] button to confirm the setting.
3. For [SSL], select whether or not to enable SSL.
4. Enter the LDAP server IP address, host name, or FQDN in the [Address]
input field
5. In the [Port Number] input field, enter a port number to be used by the
scanner to communicate with an LDAP server.
6. In the [Search Base (DN)] input field, enter the distinguished name of the
LDAP search base.
The LDAP entries under the character string entered here will become the search
target.
For details about the relation between character strings to be entered and the target
of the LDAP search, refer to

4.9 Configuring the LDAP Settings

[Authentication Server]
"LDAP Search Target" (page
126
Central Admin
Console
[Login LDAP
128).