Scanned Data Is Inappropriate - Fujitsu ScanSnap N1800 Operator's Manual

■ Check item
Is the pick roller worn out?
■ Action
Replace the pick roller.
For more details, refer to
■ Check item
Is there any foreign matter in the document feed path?
■ Action
Clean the document feed path.
When scanning with the Carrier Sheet, the [Paper jam has occurred.
Remove the documents from the ADF and try again.] message appears
and an error occurs.
■ Check item
When an error occurs while scanning with the Carrier Sheet, after the
[Scanning with the carrier sheet failed. Make sure the document is fully
inserted into the top of the carrier sheet and the folded edge is on the side
marked with the thick line, then try again.] message appears, the [Paper jam
has occurred. Remove the documents from the ADF and try again.] message
appears, and scanning fails.
■ Action
Follow the instructions in the messages, and try again.

■ Scanned Data Is Inappropriate

Scanned data is elongated.
■ Check item
Are the feed rollers dirty?
■ Action
Clean the feed rollers.
For more details, refer to
Shadow on the leading edge of the scanned data.
■ Check item
Are the feed rollers dirty?
■ Action
Clean the feed rollers.
For more details, refer to
"7.5 Replacing Parts" (page
"7.3 Cleaning Inside the Scanner" (page
"7.3 Cleaning Inside the Scanner" (page
405
8.3 Other Troubleshooting
367).
360).
360).