Setting The Standby Mode - Fujitsu ScanSnap N1800 Operator's Manual

4.7.2 Setting the Standby Mode

You can set the transition time for automatic logout, the standby mode, and power-off.
For any window after regular user login, if no operations are performed for the
specified period of time for [Logout after], the scanner automatically logs the user
out.
HINT
The scanner does not logout while the following operations are ongoing:
Scanning documents
e-Mailing a scan
Faxing a scan
Printing a scan
Saving a scan
Automatic login is enabled
For the [Login] window or any window after regular user login, if no operations are
performed for the specified period of time for [Standby after], the scanner
automatically enters standby mode. The LCD touch panel is switched off when the
scanner enters standby mode.
When the power button is pressed, the scanners start up from standby mode.
The window displayed after restarting varies according to the automatic settings in
the following way:
If automatic login is enabled, the operation window is displayed.
If automatic login is disabled, the login window is displayed.
For window transitions, refer to
When setting the time for [Standby after], the time until the scanner logs the user
out must also be included.
If no operations are performed for the specified period of time for [Power-off after]
when the scanner power is left on, the scanner power is automatically turned off.
The scanner enters standby mode first. If no further operations are performed in
standby mode, the scanner power is automatically turned off.
When setting the time for [Power-off after], the time until the scanner enters
standby mode must also be included.
4.7 Configuring the Login-Related Settings
Central Admin
"Using the Power Button" (page
107
Console
56).